[MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

[MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
---------------------+------------------------
 Reporter:  lukewmo  |      Owner:  (none)
     Type:  defect   |     Status:  new
 Priority:  Normal   |  Milestone:
Component:  ports    |    Version:
 Keywords:           |       Port:  virtuoso-7
---------------------+------------------------
 I want to build okular, but it stopped at the failure of virtuoso-7.
 The Xcode is 10.1, and it is properly installed and complete.
 The error message is the following:

 ---> Fetching distfiles for virtuoso-7
 ---> Attempting to fetch virtuoso-opensource-7.2.5.tar.gz from
 https://distfiles.macports.org/virtuoso-7
 ---> Verifying checksums for virtuoso-7
 ---> Extracting virtuoso-7
 ---> Configuring virtuoso-7
 Some antivirus software can cause the virtuoso build to hang
 indefinitely. If you have any antivirus software installed,
 please disable it while building virtuoso; it can be re-enabled
 after virtuoso has been installed.
 ---> Building virtuoso-7
 Error: Failed to build virtuoso-7: command execution failed
 Error: See /opt/local/var/macports/logs/
 _opt_local_var_macports_sources_rsync.macports.org_macports_rele
 ase_tarballs_ports_devel_virtuoso-7/virtuoso-7/main.log for
 details.
 Error: Follow https://guide.macports.org/#project.tickets to
 report a bug.
 Error: Processing of port virtuoso-7 failed
 ---> Some of the ports you installed have notes:
 libidn has the following notes:
 Please be aware that GNU libidn2 is the successor of GNU
 libidn. It comes with IDNA 2008
 and TR46 implementations and also provides a compatibility
 layer for GNU libidn.
 openldap has the following notes:
 A startup item has been generated that will aid in starting
 openldap with launchd. It is
 disabled by default. Execute the following command to start
 it, and to cause it to launch at
 startup:
 sudo port load openldap
 python27 has the following notes:
 To make this the default Python or Python 2 (i.e., the
 version run by the 'python' or
 'python2' commands), run one or both of:
 sudo port select --set python python27
 sudo port select --set python2 python27

--
Ticket URL: <https://trac.macports.org/ticket/57509>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+--------------------
  Reporter:  lukewmo     |      Owner:  (none)
      Type:  defect      |     Status:  new
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+--------------------
Changes (by lukewmo):

 * Attachment "main.log" added.


--
Ticket URL: <https://trac.macports.org/ticket/57509>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+--------------------
  Reporter:  lukewmo     |      Owner:  (none)
      Type:  defect      |     Status:  new
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+--------------------

Comment (by lukewmo):

 This happened only on  my MacBook Pro.

 I installed virtuoso-7 successfully on two IMacs  without any difficulty.
 they are also running with OS 10.14 and Xcode 10.1.

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:1>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  assigned
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------
Changes (by jmroot):

 * status:  new => assigned
 * owner:  (none) => nerdling


Old description:

> I want to build okular, but it stopped at the failure of virtuoso-7.
> The Xcode is 10.1, and it is properly installed and complete.
> The error message is the following:
>
> ---> Fetching distfiles for virtuoso-7
> ---> Attempting to fetch virtuoso-opensource-7.2.5.tar.gz from
> https://distfiles.macports.org/virtuoso-7
> ---> Verifying checksums for virtuoso-7
> ---> Extracting virtuoso-7
> ---> Configuring virtuoso-7
> Some antivirus software can cause the virtuoso build to hang
> indefinitely. If you have any antivirus software installed,
> please disable it while building virtuoso; it can be re-enabled
> after virtuoso has been installed.
> ---> Building virtuoso-7
> Error: Failed to build virtuoso-7: command execution failed
> Error: See /opt/local/var/macports/logs/
> _opt_local_var_macports_sources_rsync.macports.org_macports_rele
> ase_tarballs_ports_devel_virtuoso-7/virtuoso-7/main.log for
> details.
> Error: Follow https://guide.macports.org/#project.tickets to
> report a bug.
> Error: Processing of port virtuoso-7 failed
> ---> Some of the ports you installed have notes:
> libidn has the following notes:
> Please be aware that GNU libidn2 is the successor of GNU
> libidn. It comes with IDNA 2008
> and TR46 implementations and also provides a compatibility
> layer for GNU libidn.
> openldap has the following notes:
> A startup item has been generated that will aid in starting
> openldap with launchd. It is
> disabled by default. Execute the following command to start
> it, and to cause it to launch at
> startup:
> sudo port load openldap
> python27 has the following notes:
> To make this the default Python or Python 2 (i.e., the
> version run by the 'python' or
> 'python2' commands), run one or both of:
> sudo port select --set python python27
> sudo port select --set python2 python27
New description:

 I want to build okular, but it stopped at the failure of virtuoso-7.
 The Xcode is 10.1, and it is properly installed and complete.
 The error message is the following:
 {{{
 ---> Fetching distfiles for virtuoso-7
 ---> Attempting to fetch virtuoso-opensource-7.2.5.tar.gz from
 https://distfiles.macports.org/virtuoso-7
 ---> Verifying checksums for virtuoso-7
 ---> Extracting virtuoso-7
 ---> Configuring virtuoso-7
 Some antivirus software can cause the virtuoso build to hang
 indefinitely. If you have any antivirus software installed,
 please disable it while building virtuoso; it can be re-enabled
 after virtuoso has been installed.
 ---> Building virtuoso-7
 Error: Failed to build virtuoso-7: command execution failed
 Error: See /opt/local/var/macports/logs/
 _opt_local_var_macports_sources_rsync.macports.org_macports_rele
 ase_tarballs_ports_devel_virtuoso-7/virtuoso-7/main.log for
 details.
 Error: Follow https://guide.macports.org/#project.tickets to
 report a bug.
 Error: Processing of port virtuoso-7 failed
 ---> Some of the ports you installed have notes:
 libidn has the following notes:
 Please be aware that GNU libidn2 is the successor of GNU
 libidn. It comes with IDNA 2008
 and TR46 implementations and also provides a compatibility
 layer for GNU libidn.
 openldap has the following notes:
 A startup item has been generated that will aid in starting
 openldap with launchd. It is
 disabled by default. Execute the following command to start
 it, and to cause it to launch at
 startup:
 sudo port load openldap
 python27 has the following notes:
 To make this the default Python or Python 2 (i.e., the
 version run by the 'python' or
 'python2' commands), run one or both of:
 sudo port select --set python python27
 sudo port select --set python2 python27
 }}}

--

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:2>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  assigned
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------

Comment (by kencu):

 Oh oh:
 {{{
 clang: error: no such file or directory:
 '/usr/local/lib/libfreetype.dylib'
 }}}
 Looks like you have either homebrew installed, or perhaps somehow you have
 installed freetype yourself from some kind of archive. Either way, that's
 your issue.

 Sort that out, uninstall homebrew, get rid of the `/usr/local` stuff,
 clean up your build, and try again. Please post back if you still have
 troubles after doing all that.

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:3>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  assigned
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------

Comment (by lukewmo):

 Thanks to Oh oh.

 Homebrew is not installed on this MacBook Pro. Indeed I do not have the
 file: /usr/local/lib/libfreetype.dylib as you indicated. Should I install
 it from Opensource?
 I am trouled by the fact that I installed virtuoso-7 successfully, and
 they do not have this libfree.dylib either.

 I cleared the Macports completely, and reinstalled it. The trouble
 remains.

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:4>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  assigned
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------

Comment (by kencu):

 No -- it is erroring out because it's not finding that file -- but it
 should not be looking for that file in the first place.

 So something on that machine is making it look for that file, and this is
 what you need to sort out.

 Is there anything at all in `/usr/local`? If so, get it outta there.

 If there is nothing in `/usr/local` and this is still happening, you have
 a mystery on your hands.

 Try a `trace build`, in that case:
 {{{
 sudo port -v -t install  virtuoso-7
 }}}
 and see where that goes for you.

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:5>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  assigned
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:              |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------

Comment (by lukewmo):

 Dear Ken:

 Thanks for your kind help. My /usr/local is full of many things, such as
 the TeX Live 2018. I cannot get rid of them. After trying you suggestion
 to  no avail, I just deleted
 the whole Macports package, and reinstalled it the 2nd time. It succeeded.

 The failure is probably due to a bad download, but I cannot be sure.

 Please kindly close this ticket.

--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:6>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: [MacPorts] #57509: Virtuoso-7 fail to build in Mac OS 10.14

MacPorts
In reply to this post by MacPorts
#57509: Virtuoso-7 fail to build in Mac OS 10.14
-------------------------+----------------------
  Reporter:  lukewmo     |      Owner:  nerdling
      Type:  defect      |     Status:  closed
  Priority:  Normal      |  Milestone:
 Component:  ports       |    Version:
Resolution:  invalid     |   Keywords:
      Port:  virtuoso-7  |
-------------------------+----------------------
Changes (by nerdling):

 * status:  assigned => closed
 * resolution:   => invalid


--
Ticket URL: <https://trac.macports.org/ticket/57509#comment:7>
MacPorts <https://www.macports.org/>
Ports system for macOS