#60774: libdevil being reported as a broken port

classic Classic list List threaded Threaded
15 messages Options
Reply | Threaded
Open this post in threaded view
|

#60774: libdevil being reported as a broken port

macports-4
#60774: libdevil being reported as a broken port
-----------------------------+----------------------
 Reporter:  programmingkidx  |      Owner:  (none)
     Type:  defect           |     Status:  new
 Priority:  Normal           |  Milestone:
Component:  ports            |    Version:
 Keywords:  broken port      |       Port:  libdevil
-----------------------------+----------------------
 When I try to install libdevil Macports tries installing it three times
 then says the port is broken. This is the full message:
 {{{
 Error: Port libdevil is still broken after rebuilding it more than 3
 times.
 Error: Please run port -d -y rev-upgrade and use the output to report a
 bug.
 Error: rev-upgrade failed: Port libdevil still broken after rebuilding 3
 times
 }}}

 Here is some more output I saw when I ran port -d -y rev-upgrade:

 {{{
 DEBUG: Ignoring loadcommand containing @executable_path in
 /opt/local/libexec/ld64/ld-274
 libdevil is using libstdc++ (this installation is configured to use
 libc++)
 cegui is using libstdc++ (this installation is configured to use libc++)

 DEBUG: Broken: libdevil
 DEBUG: Broken: cegui
 DEBUG: Processing port libdevil @0:1.7.8_12
 DEBUG: Dependent cegui is broken, adding edge from cegui to libdevil
 DEBUG: Making cegui new head of stack
 DEBUG: Processing port cegui @0:0.7.9_1
 DEBUG: Removing cegui from stack

 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libdevil 1.7.8_12 exists in the ports tree
 DEBUG: libdevil 1.7.8_12  is the latest installed
 DEBUG: libdevil 1.7.8_12  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/libdevil
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: cxx_stdlib mismatch ... upgrading!
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lcms 1.19_5 exists in the ports tree
 DEBUG: lcms 1.19_5  is the latest installed
 DEBUG: lcms 1.19_5  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/lcms
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! lcms 1.19_5 >= lcms 1.19_5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 4.1.0_0 exists in the ports tree
 DEBUG: tiff 4.1.0_0  is the latest installed
 DEBUG: tiff 4.1.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/tiff
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup xcodeversion 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! tiff 4.1.0_0 >= tiff 4.1.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 9d_0 exists in the ports tree
 DEBUG: jpeg 9d_0  is the latest installed
 DEBUG: jpeg 9d_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/jpeg
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! jpeg 9d_0 >= jpeg 9d_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xz 5.2.5_0 exists in the ports tree
 DEBUG: xz 5.2.5_0  is the latest installed
 DEBUG: xz 5.2.5_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/xz
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xz 5.2.5_0 >= xz 5.2.5_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.16_0 exists in the ports tree
 DEBUG: libiconv 1.16_0  is the latest installed
 DEBUG: libiconv 1.16_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/textproc/libiconv
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: Sourcing PortGroup xcodeversion 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libiconv 1.16_0 >= libiconv 1.16_0
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: gettext 0.19.8.1_2 exists in the ports tree
 DEBUG: gettext 0.19.8.1_2  is the latest installed
 DEBUG: gettext 0.19.8.1_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/gettext
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: compiler clang 503.0.40 not blacklisted because it doesn't match
 {clang < 211.10.1}
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! gettext 0.19.8.1_2 >= gettext 0.19.8.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 6.2_0 exists in the ports tree
 DEBUG: ncurses 6.2_0  is the latest installed
 DEBUG: ncurses 6.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/ncurses
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! ncurses 6.2_0 >= ncurses 6.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.11_0 exists in the ports tree
 DEBUG: zlib 1.2.11_0  is the latest installed
 DEBUG: zlib 1.2.11_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/zlib
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup xcodeversion 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! zlib 1.2.11_0 >= zlib 1.2.11_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zstd 1.4.5_0 exists in the ports tree
 DEBUG: zstd 1.4.5_0  is the latest installed
 DEBUG: zstd 1.4.5_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/zstd
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup github 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: Re-registering default for livecheck.regex
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! zstd 1.4.5_0 >= zstd 1.4.5_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lz4 1.9.2_0 exists in the ports tree
 DEBUG: lz4 1.9.2_0  is the latest installed
 DEBUG: lz4 1.9.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/lz4
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup github 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: Re-registering default for livecheck.regex
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! lz4 1.9.2_0 >= lz4 1.9.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libmng 2.0.3_0 exists in the ports tree
 DEBUG: libmng 2.0.3_0  is the latest installed
 DEBUG: libmng 2.0.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/libmng
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libmng 2.0.3_0 >= libmng 2.0.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: lcms2 2.11_0 exists in the ports tree
 DEBUG: lcms2 2.11_0  is the latest installed
 DEBUG: lcms2 2.11_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/lcms2
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! lcms2 2.11_0 >= lcms2 2.11_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.6.37_0 exists in the ports tree
 DEBUG: libpng 1.6.37_0  is the latest installed
 DEBUG: libpng 1.6.37_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/libpng
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libpng 1.6.37_0 >= libpng 1.6.37_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jasper 2.0.14_0 exists in the ports tree
 DEBUG: jasper 2.0.14_0  is the latest installed
 DEBUG: jasper 2.0.14_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/jasper
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Re-registering default for configure.dir
 DEBUG: Re-registering default for configure.pre_args
 DEBUG: Re-registering default for build.dir
 DEBUG: Re-registering default for destroot.target
 DEBUG: Sourcing PortGroup cmake 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! jasper 2.0.14_0 >= jasper 2.0.14_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xrender 0.9.10_1 exists in the ports tree
 DEBUG: xrender 0.9.10_1  is the latest installed
 DEBUG: xrender 0.9.10_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11/xrender
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xrender 0.9.10_1 >= xrender 0.9.10_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.6.9_0 exists in the ports tree
 DEBUG: xorg-libX11 1.6.9_0  is the latest installed
 DEBUG: xorg-libX11 1.6.9_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libX11
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libX11 1.6.9_0 >= xorg-libX11 1.6.9_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.1.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.1.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.1.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXdmcp
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXdmcp 1.1.3_0 >= xorg-libXdmcp 1.1.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.9_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.9_0  is the latest installed
 DEBUG: xorg-libXau 1.0.9_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXau
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXau 1.0.9_0 >= xorg-libXau 1.0.9_0
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: xorg-xorgproto 2020.1_0 exists in the ports tree
 DEBUG: xorg-xorgproto 2020.1_0  is the latest installed
 DEBUG: xorg-xorgproto 2020.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-xorgproto
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-xorgproto 2020.1_0 >= xorg-xorgproto
 2020.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libxcb 1.14_0 exists in the ports tree
 DEBUG: xorg-libxcb 1.14_0 +python38 is the latest installed
 DEBUG: xorg-libxcb 1.14_0 +python38 is active
 DEBUG: Merging existing variants '+python38' into variants
 DEBUG: new fully merged portvariants: python38 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libxcb
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Executing variant python38 provides python38
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libxcb 1.14_0 >= xorg-libxcb 1.14_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcb-proto 1.14_0 exists in the ports tree
 DEBUG: xorg-xcb-proto 1.14_0 +python38 is the latest installed
 DEBUG: xorg-xcb-proto 1.14_0 +python38 is active
 DEBUG: Merging existing variants '+python38' into variants
 DEBUG: new fully merged portvariants: python38 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-xcb-proto
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Executing variant python38 provides python38
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-xcb-proto 1.14_0 >= xorg-xcb-proto 1.14_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxml2 2.9.10_0 exists in the ports tree
 DEBUG: libxml2 2.9.10_0  is the latest installed
 DEBUG: libxml2 2.9.10_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/textproc/libxml2
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libxml2 2.9.10_0 >= libxml2 2.9.10_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: icu 65.1_2 exists in the ports tree
 DEBUG: icu 65.1_2  is the latest installed
 DEBUG: icu 65.1_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/icu
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! icu 65.1_2 >= icu 65.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libpthread-stubs 0.4_0 exists in the ports tree
 DEBUG: xorg-libpthread-stubs 0.4_0  is the latest installed
 DEBUG: xorg-libpthread-stubs 0.4_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libpthread-stubs
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libpthread-stubs 0.4_0 >= xorg-libpthread-
 stubs 0.4_0
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: mesa 17.1.6_2 exists in the ports tree
 DEBUG: mesa 17.1.6_2 +osmesa+python27 is the latest installed
 DEBUG: mesa 17.1.6_2 +osmesa+python27 is active
 DEBUG: Merging existing variants '+osmesa+python27' into variants
 DEBUG: new fully merged portvariants: osmesa + python27 +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11/mesa
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 DEBUG: compiler clang 503.0.40 blacklisted because it matches {clang <
 800}
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Executing variant python27 provides python27
 DEBUG: Executing variant osmesa provides osmesa
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Chosen compiler macports-clang-9.0 is provided by a port, adding
 dependency
 DEBUG: Adding depends_build port:clang-9.0
 DEBUG: Adding depends_skip_archcheck clang-9.0
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! mesa 17.1.6_2 >= mesa 17.1.6_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.2.9_0 exists in the ports tree
 DEBUG: expat 2.2.9_0  is the latest installed
 DEBUG: expat 2.2.9_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/textproc/expat
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! expat 2.2.9_0 >= expat 2.2.9_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXext 1.3.4_0 exists in the ports tree
 DEBUG: xorg-libXext 1.3.4_0  is the latest installed
 DEBUG: xorg-libXext 1.3.4_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXext
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXext 1.3.4_0 >= xorg-libXext 1.3.4_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdamage 1.1.5_0 exists in the ports tree
 DEBUG: xorg-libXdamage 1.1.5_0  is the latest installed
 DEBUG: xorg-libXdamage 1.1.5_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXdamage
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXdamage 1.1.5_0 >= xorg-libXdamage
 1.1.5_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXfixes 5.0.3_1 exists in the ports tree
 DEBUG: xorg-libXfixes 5.0.3_1  is the latest installed
 DEBUG: xorg-libXfixes 5.0.3_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXfixes
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXfixes 5.0.3_1 >= xorg-libXfixes
 5.0.3_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXi 1.7.10_0 exists in the ports tree
 DEBUG: xorg-libXi 1.7.10_0  is the latest installed
 DEBUG: xorg-libXi 1.7.10_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXi
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXi 1.7.10_0 >= xorg-libXi 1.7.10_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXmu 1.1.3_0 exists in the ports tree
 DEBUG: xorg-libXmu 1.1.3_0  is the latest installed
 DEBUG: xorg-libXmu 1.1.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXmu
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXmu 1.1.3_0 >= xorg-libXmu 1.1.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXt 1.2.0_0 exists in the ports tree
 DEBUG: xorg-libXt 1.2.0_0  is the latest installed
 DEBUG: xorg-libXt 1.2.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXt
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXt 1.2.0_0 >= xorg-libXt 1.2.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libsm 1.2.3_0 exists in the ports tree
 DEBUG: xorg-libsm 1.2.3_0  is the latest installed
 DEBUG: xorg-libsm 1.2.3_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libsm
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libsm 1.2.3_0 >= xorg-libsm 1.2.3_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libice 1.0.10_0 exists in the ports tree
 DEBUG: xorg-libice 1.0.10_0  is the latest installed
 DEBUG: xorg-libice 1.0.10_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libice
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libice 1.0.10_0 >= xorg-libice 1.0.10_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXxf86vm 1.1.4_1 exists in the ports tree
 DEBUG: xorg-libXxf86vm 1.1.4_1  is the latest installed
 DEBUG: xorg-libXxf86vm 1.1.4_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXxf86vm
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXxf86vm 1.1.4_1 >= xorg-libXxf86vm
 1.1.4_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libGLU 9.0.1_0 exists in the ports tree
 DEBUG: libGLU 9.0.1_0  is the latest installed
 DEBUG: libGLU 9.0.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11/libGLU
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libGLU 9.0.1_0 >= libGLU 9.0.1_0
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
 DEBUG: Starting logging for libdevil
 DEBUG: OS X 10.8 (darwin/12.5.0) arch i386
 DEBUG: MacPorts 2.6.2
 DEBUG: Xcode 5.1.1
 DEBUG: SDK 10.8
 DEBUG: MACOSX_DEPLOYMENT_TARGET: 10.8
 For libdevil: skipping org.macports.main (dry run)
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
     .. and skipping org.macports.archivefetch
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
 DEBUG: Starting logging for libdevil
 DEBUG: OS X 10.8 (darwin/12.5.0) arch i386
 DEBUG: MacPorts 2.6.2
 DEBUG: Xcode 5.1.1
 DEBUG: SDK 10.8
 DEBUG: MACOSX_DEPLOYMENT_TARGET: 10.8
 --->  Computing dependencies for libdevil
 DEBUG: Searching for dependency: lcms
 DEBUG: Found Dependency: receipt exists for lcms
 DEBUG: Searching for dependency: libmng
 DEBUG: Found Dependency: receipt exists for libmng
 DEBUG: Searching for dependency: libpng
 DEBUG: Found Dependency: receipt exists for libpng
 DEBUG: Searching for dependency: jpeg
 DEBUG: Found Dependency: receipt exists for jpeg
 DEBUG: Searching for dependency: tiff
 DEBUG: Found Dependency: receipt exists for tiff
 DEBUG: Searching for dependency: jasper
 DEBUG: Found Dependency: receipt exists for jasper
 DEBUG: Searching for dependency: xrender
 DEBUG: Found Dependency: receipt exists for xrender
 DEBUG: Searching for dependency: mesa
 DEBUG: Found Dependency: receipt exists for mesa
 DEBUG: Searching for dependency: libGLU
 DEBUG: Found Dependency: receipt exists for libGLU
     .. and skipping org.macports.main
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
     .. and skipping org.macports.fetch
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.checksum
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.extract
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.patch
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.configure
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.build
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.destroot
 DEBUG: Uninstalling libdevil 1.7.8_12
 Skipping uninstall libdevil @1.7.8_12 (dry run)
 Skipping activate libdevil @1.7.8_12 (dry run)
 DEBUG: Rebuilding port libdevil finished with status 0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cegui 0.7.9_1 exists in the ports tree
 DEBUG: cegui 0.7.9_1  is the latest installed
 DEBUG: cegui 0.7.9_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/cegui
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: cxx_stdlib mismatch ... upgrading!
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.29.2_0 exists in the ports tree
 DEBUG: pkgconfig 0.29.2_0  is the latest installed
 DEBUG: pkgconfig 0.29.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/pkgconfig
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! pkgconfig 0.29.2_0 >= pkgconfig 0.29.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freeglut 3.2.1_0 exists in the ports tree
 DEBUG: freeglut 3.2.1_0  is the latest installed
 DEBUG: freeglut 3.2.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11/freeglut
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Re-registering default for configure.dir
 DEBUG: Re-registering default for configure.pre_args
 DEBUG: Re-registering default for build.dir
 DEBUG: Re-registering default for destroot.target
 DEBUG: Sourcing PortGroup cmake 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! freeglut 3.2.1_0 >= freeglut 3.2.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXrandr 1.5.2_0 exists in the ports tree
 DEBUG: xorg-libXrandr 1.5.2_0  is the latest installed
 DEBUG: xorg-libXrandr 1.5.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/x11
 /xorg-libXrandr
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! xorg-libXrandr 1.5.2_0 >= xorg-libXrandr
 1.5.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freeimage 3.18.0_0 exists in the ports tree
 DEBUG: freeimage 3.18.0_0  is the latest installed
 DEBUG: freeimage 3.18.0_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/graphics/freeimage
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Adding legacy build support
 DEBUG: Sourcing PortGroup legacysupport 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/legacysupport-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: Running callback add_legacysupport
 DEBUG: Adding legacy build support
 DEBUG: Finished running callback add_legacysupport
 DEBUG: No need to upgrade! freeimage 3.18.0_0 >= freeimage 3.18.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: legacy-support 0.12_0 exists in the ports tree
 DEBUG: legacy-support 0.12_0  is the latest installed
 DEBUG: legacy-support 0.12_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel
 /legacy-support
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup github 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Re-registering default for livecheck.regex
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! legacy-support 0.12_0 >= legacy-support 0.12_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.10.2_1 exists in the ports tree
 DEBUG: freetype 2.10.2_1  is the latest installed
 DEBUG: freetype 2.10.2_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/print/freetype
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! freetype 2.10.2_1 >= freetype 2.10.2_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: brotli 1.0.7_0 exists in the ports tree
 DEBUG: brotli 1.0.7_0  is the latest installed
 DEBUG: brotli 1.0.7_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/brotli
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup github 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
 DEBUG: Re-registering default for configure.dir
 DEBUG: Re-registering default for configure.pre_args
 DEBUG: Re-registering default for build.dir
 DEBUG: Re-registering default for destroot.target
 DEBUG: Sourcing PortGroup cmake 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
 DEBUG: Re-registering default for livecheck.regex
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! brotli 1.0.7_0 >= brotli 1.0.7_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.8_0 exists in the ports tree
 DEBUG: bzip2 1.0.8_0  is the latest installed
 DEBUG: bzip2 1.0.8_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/archivers/bzip2
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! bzip2 1.0.8_0 >= bzip2 1.0.8_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pcre 8.44_0 exists in the ports tree
 DEBUG: pcre 8.44_0  is the latest installed
 DEBUG: pcre 8.44_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/pcre
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! pcre 8.44_0 >= pcre 8.44_0
 DEBUG: epoch: in tree: 20090923 installed: 20090923
 DEBUG: libedit 20191231-3.1_0 exists in the ports tree
 DEBUG: libedit 20191231-3.1_0  is the latest installed
 DEBUG: libedit 20191231-3.1_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/devel/libedit
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Sourcing PortGroup clang_dependency 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/clang_dependency-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! libedit 20191231-3.1_0 >= libedit
 20191231-3.1_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tinyxml 2.6.2_3 exists in the ports tree
 DEBUG: tinyxml 2.6.2_3  is the latest installed
 DEBUG: tinyxml 2.6.2_3  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/textproc/tinyxml
 DEBUG: OS darwin/12.5.0 (macOS 10.8) arch i386
 DEBUG: Re-registering default for configure.dir
 DEBUG: Re-registering default for configure.pre_args
 DEBUG: Re-registering default for build.dir
 DEBUG: Re-registering default for destroot.target
 DEBUG: Sourcing PortGroup cmake 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/macports/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Running callback portconfigure::add_automatic_compiler_dependencies
 DEBUG: Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 DEBUG: Running callback portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 DEBUG: Running callback portstartupitem::add_notes
 DEBUG: Finished running callback portstartupitem::add_notes
 DEBUG: No need to upgrade! tinyxml 2.6.2_3 >= tinyxml 2.6.2_3
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
 DEBUG: Starting logging for cegui
 DEBUG: OS X 10.8 (darwin/12.5.0) arch i386
 DEBUG: MacPorts 2.6.2
 DEBUG: Xcode 5.1.1
 DEBUG: SDK 10.8
 DEBUG: MACOSX_DEPLOYMENT_TARGET: 10.8
 For cegui: skipping org.macports.main (dry run)
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
     .. and skipping org.macports.archivefetch
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
 DEBUG: Starting logging for cegui
 DEBUG: OS X 10.8 (darwin/12.5.0) arch i386
 DEBUG: MacPorts 2.6.2
 DEBUG: Xcode 5.1.1
 DEBUG: SDK 10.8
 DEBUG: MACOSX_DEPLOYMENT_TARGET: 10.8
 --->  Computing dependencies for cegui
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: expat
 DEBUG: Found Dependency: receipt exists for expat
 DEBUG: Searching for dependency: freeglut
 DEBUG: Found Dependency: receipt exists for freeglut
 DEBUG: Searching for dependency: freeimage
 DEBUG: Found Dependency: receipt exists for freeimage
 DEBUG: Searching for dependency: freetype
 DEBUG: Found Dependency: receipt exists for freetype
 DEBUG: Searching for dependency: libdevil
 DEBUG: Found Dependency: receipt exists for libdevil
 DEBUG: Searching for dependency: libxml2
 DEBUG: Found Dependency: receipt exists for libxml2
 DEBUG: Searching for dependency: pcre
 DEBUG: Found Dependency: receipt exists for pcre
 DEBUG: Searching for dependency: tinyxml
 DEBUG: Found Dependency: receipt exists for tinyxml
 DEBUG: Searching for dependency: xorg-libice
 DEBUG: Found Dependency: receipt exists for xorg-libice
 DEBUG: Searching for dependency: xorg-libsm
 DEBUG: Found Dependency: receipt exists for xorg-libsm
     .. and skipping org.macports.main
 DEBUG: dropping privileges: euid changed to 502, egid changed to 501.
     .. and skipping org.macports.fetch
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.checksum
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.extract
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.patch
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.configure
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.build
 DEBUG: Privilege de-escalation not attempted as not running as root.
     .. and skipping org.macports.destroot
 DEBUG: Uninstalling cegui 0.7.9_1
 Skipping uninstall cegui @0.7.9_1 (dry run)
 Skipping activate cegui @0.7.9_1 (dry run)
 DEBUG: Rebuilding port cegui finished with status 0
 Warning: If this was no dry run, rev-upgrade would now run the checks
 again to find unresolved and newly created problems
 }}}

 Operating system: Mac OS 10.8

--
Ticket URL: <https://trac.macports.org/ticket/60774>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil being reported as a broken port

macports-4
#60774: libdevil being reported as a broken port
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------
Changes (by mf2k):

 * cc: ryandesign (removed)
 * keywords:  broken port =>
 * status:  new => assigned
 * owner:  (none) => ryandesign


Comment:

 Please attach the main.log file instead of pasting long output into the
 ticket description.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:1>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib (was: libdevil being reported as a broken port)

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:2>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I hadn't been too excited about the libdevil port. libdevil seemed to have
 been abandoned by its developers around 2009, and it was forked in 2013
 into resil, for which we also have a port. Then resil's developers seemed
 to abandon it in 2014. But then in 2017 libdevil came back with a new
 release, and in 2019 resil had a new release. So I do need to go back and
 update both ports, which will hopefully resolve the issues you noticed.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:3>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by programmingkidx):

 Thank you very much for helping with this issue. If there is anything I
 could do to help please let me know.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:4>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I spent a few hours looking at updating resil to 1.8.4. Boy, if there were
 ever a time to let loose a profound barrage of expletives, this would be
 it. I had hoped that their first new release in 5 years would be a fresh
 start, but instead of fixing the issues they had, they've created a whole
 new set of issues. It doesn't build at all. It's as if nobody had ever
 tried to build it. I added resil back when I thought libdevil was dead and
 resil was its replacement. But since libdevil isn't dead anymore, I'll
 give another try at updating it. If that works, I can happily delete
 resil.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:5>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I have libdevil 1.8.0 building but I'm switching it to cmake so I need to
 verify if all the dependencies and variants still apply. I'll check that
 later.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:6>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 Replying to [comment:6 ryandesign]:
 > I'm switching it to cmake

 Well maybe I'm not. I can't find any libsdl support in the cmake build
 system, and we do currently offer a libsdl variant in the port. There's a
 libdevil bug port from 10 years ago saying the cmake build system is no
 longer supported.

 What started me down the cmake road was that I spent several hours bashing
 my head against resil's autotools build system before discovering that
 they had a cmake build system that worked fine—well, it configured fine
 and then failed to build. When I then gave up on resil entirely, I assumed
 I would be saving myself time by switching libdevil from autotools to
 cmake as well, but I think I was in error.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:7>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by kencu):

 Replying to [comment:7 ryandesign]:

 > I can't find any libsdl support in the cmake build system, and we do
 currently offer a libsdl variant in the port.

 I have not used it, and I am reluctant to stick my nose in here TBH, but
 SDL support apparently exists, if that is of any use to you
 {{{
 % port contents cmake | grep SDL
   /opt/local/share/cmake-3.17/Help/module/FindSDL.rst
   /opt/local/share/cmake-3.17/Help/module/FindSDL_image.rst
   /opt/local/share/cmake-3.17/Help/module/FindSDL_mixer.rst
   /opt/local/share/cmake-3.17/Help/module/FindSDL_net.rst
   /opt/local/share/cmake-3.17/Help/module/FindSDL_sound.rst
   /opt/local/share/cmake-3.17/Help/module/FindSDL_ttf.rst
   /opt/local/share/cmake-3.17/Modules/FindSDL.cmake
   /opt/local/share/cmake-3.17/Modules/FindSDL_image.cmake
   /opt/local/share/cmake-3.17/Modules/FindSDL_mixer.cmake
   /opt/local/share/cmake-3.17/Modules/FindSDL_net.cmake
   /opt/local/share/cmake-3.17/Modules/FindSDL_sound.cmake
   /opt/local/share/cmake-3.17/Modules/FindSDL_ttf.cmake
 }}}

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:8>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I'm sure that cmake has a way that developers could write their
 CMakeLists.txt to find libsdl, I just don't think the developer of
 libdevil has done that.

 I'm not going to spend time developing this for them because there are
 years worth of pull requests and issues on github that the developer has
 not responded to plus a decade worth of tickets on sourceforge.

 I may be out of luck with the configure script too. It also obviously does
 not work, and was deleted from their repo shortly after the last release.
 I've now reminded myself of [https://github.com/DentonW/DevIL/issues/35
 this issue] which in 2016 said:

 > The current intention is to phase out the autotools build altogether

 So I think that's what they did. The [https://sourceforge.net/p/openil
 /support-requests/47/ 10-year-old bug report about the cmake build system
 no longer being supported] must be out of date.

 So I'll go with the cmake build and libsdl support will disappear until
 the developer brings it back.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:9>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by kencu):

 It
 [https://github.com/LuaDist/libdevil/blob/edef0fb21185f95f37ff10a046baaac196dae0ac/CMakeLists.txt#L22
 existed] in the cmake build at least at one time, it appears. Upstream
 must have pulled it out.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:10>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I don't think that's the official github repo;
 [https://github.com/DentonW/DevIL this] is the one linked from
 [http://openil.sourceforge.net the project's sourceforge homepage].

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:11>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by programmingkidx):

 How were you able to build LibDevIL? When I tried I saw errors. When I
 looked at the source code I was really disappointed with how complicated
 it was made to be.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:13>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  assigned
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:                   |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------

Comment (by ryandesign):

 I'll try to find a moment to finish up and push my libdevil updates.

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:14>
MacPorts <https://www.macports.org/>
Ports system for macOS
Reply | Threaded
Open this post in threaded view
|

Re: #60774: libdevil is not using the right cxx_stdlib

macports-4
In reply to this post by macports-4
#60774: libdevil is not using the right cxx_stdlib
------------------------------+------------------------
  Reporter:  programmingkidx  |      Owner:  ryandesign
      Type:  defect           |     Status:  closed
  Priority:  Normal           |  Milestone:
 Component:  ports            |    Version:
Resolution:  fixed            |   Keywords:
      Port:  libdevil         |
------------------------------+------------------------
Changes (by ryandesign):

 * status:  assigned => closed
 * resolution:   => fixed


Comment:

 In [changeset:"032d3d83049edf338efb727633939e9693dd1999/macports-ports"
 032d3d83049edf338efb727633939e9693dd1999/macports-ports] (master):
 {{{
 #!ConfigurableCommitTicketReference repository="macports-ports"
 revision="032d3d83049edf338efb727633939e9693dd1999"
 libdevil: Update to 1.8.0

 Closes: https://trac.macports.org/ticket/60774
 }}}

--
Ticket URL: <https://trac.macports.org/ticket/60774#comment:15>
MacPorts <https://www.macports.org/>
Ports system for macOS